|
|
Post by graytr on Mar 5, 2013 22:50:59 GMT -5
I have been thinking of getting into reloading for awhile. But I don't know were to start thereis so many different types of presses-dies-powder. What do some of you members on here that reload use or suggest. I don't want to sink a ton of money into it either.
|
|
|
|
Post by Admin on Mar 6, 2013 10:39:58 GMT -5
It all depends on what you want to do. If high volume is desired then go for a progressive. If you don't mind switching out dies and having more control go with a single stage. If you don't like having to switch out dies and want a little speed go with a turret press. I currently use a lee turret press and have had nothing but good luck with it. It is easy and has served me well. There are lots of different brands out their to choose from. I would research what you are wanting to do with a press first. Here is a list with links of different companies. RCBS www.rcbs.com/LEE leeprecision.com/DILLON www.dillonprecision.comREDDING www.redding-reloading.com/SMART www.smartreloader.comCH4D www.ch4d.com/ I may have missed some, but there is lots of options. for powder, There are many brands as well. Are you going to reload rifle, shotshell, handgun calibers. Some are multi purpose some are not. I would recommend getting a reloading book to sort through and find some more information for yourself. |
|
|
|
Post by erich on Mar 6, 2013 12:59:48 GMT -5
Honestly, if you're just starting out, you might consider a Lee Hand Press kit to see if you're really into it. It won't cost much and it'll give you a good taste of what you're getting into. Plus, you can always use the hand press as you become more of an advanced loader (I've had mine for over 25 years and still use it a fair amount, despite being set up with a lot of other stuff.) I'd look at Natchez Shooters Supply to see whether they have a decent price on them.
The other thing that I'd tell you is that used reloading equipment is pretty easy to find and is pretty inexpensive compared to the new stuff. If you decide to move beyond the Lee Hand Press, you might look at local stores or on Craig's List to see what's out there locally (because the stuff's so heavy, you don't want to pay for shipping if you can avoid it).
|
|
|
|
Post by jeffchance on Mar 19, 2013 0:36:32 GMT -5
I have the Lee Classic Cast Turret. I load for .25ACP, .32ACP, .380, 9mm, and 40 S&W currently. All dies are in their own turrets, and the hardest part of changing calibers is getting the powder measure setup. I prime on the press and use the Auto Disc measure with the adjustable charge bar. Once set up, I can load 100 in about an hour. I find it very relaxing and rewarding.
JEFF
|
|
